Remove Hair Clogs from Your Drain: Ways to Unclog and Prevent Drains Problem

Drain Disaster? Say No More with Our Guide to Unclogging and Preventing Hair Clogs

Hair often clogs the bathtub and shower drains. Most people experience hair clogs. Even with a drain stopper, short and long hair will still go down the drain and form clumps that clog pipes. In this case, knowing how to remove hair from the drain is essential.

Many use strong chemical drain cleaners for clogged drains. Most of these products are corrosive and can slowly harm plumbing lines. Others quickly contact the plumber and spend a lot. Hair removal from drains is simple and inexpensive using home methods.

DIY Drain Hair Removal Methods

Here are several hair blockage solutions for your bathroom sink, shower, or tub drain.

Vinegar with Baking Soda

Baking soda and vinegar are effective hair uncloggers. Baking soda kills fungus and germs and dissolves hair in drains. Here are the steps for clearing clogs with baking soda and vinegar:

1. In a measuring cup, mix together 1/3 cup baking soda and 1/3 cup white vinegar.
2. Slowly pour the mixture down the drain that is clogged.
3. Wait a few minutes so the mixture can start to work on the clog. The baking soda and vinegar will react and bubble, which helps break up the clog.
4. After a few minutes, run hot water down the drain to clear it. This will help get rid of any leftover trash.
5. If the clog is not completely gone, repeat the steps.

It's important to remember that this method works for hair and soap scum clogs, but it might not work for all types of clogs. If the clog is really bad or you can't get it out, it might be best to call a plumber for help.

Use a Needle-Nose Pliers or a Wire Hanger

If your drain has a removable cover, use pliers or a wire hanger to remove hair. This requires rubber gloves, a screwdriver, a flashlight, and needle-nose pliers.

1. Start by straightening a wire hanger or acquiring needle-nose pliers.
2. Use pliers to loosen and remove the P-trap, the curved pipe under the sinks, to access the obstruction.
3. Use pliers or a wire hanger to remove the hair clog.
4. Run hot water through the pipes after reattaching the P-trap.
5. If the obstruction persists, repeat.
6. A hair catcher in the shower or bathtub helps avoid future clogs by catching hair before it goes down the drain.

Put in a Snake Pipe

A plumbing snake is just a long, flexible wire or plastic tool that "snakes" its way down drains and breaks up clogs quickly and easily. It is also called an auger. You can buy one at your local hardware store if you don't already have one at home. Augers come in many sizes and styles, depending on how they are supposed to be used.

When choosing an auger (also known as a plumber's snake), here are some things to consider:

• Length: Think about how long the auger is, because that will affect how far it can go into the pipes. A longer auger can be used for more things and can get into deeper clogs.
• Flexibility: Some augers are more flexible than others, which can make them easier to move in tight spaces.
• Cable Thickness: Think about the thickness of the cable, which will tell you how long it will last. A cable that is thicker will be less likely to bend and kink.
• Cable Material: Augers can be made of different things, like plastic, metal, or steel for the cables. Steel augers are thought to last the longest and be the most durable.
• Handle: Look for an auger with a handle that is comfortable and easy to hold.
• Type of tip: Some augers have different types of tips, like a spiral tip or a bulb head. Different kinds of clogs can benefit from these tips.
• Brand reputation and warranty: Look for a brand with a good reputation and a warranty that will give you peace of mind when you use the product.

Here's how to use a snake pipe to get rid of hair clogs:

1. Get a snake pipe ready first.
2. Find the P-trap, which is the curved pipe under the sink, and loosen and pull it out with a pipe wrench to get to the clog.
3. Put the snake pipe into the pipe and push it through until you feel resistance. This is the clog.
4. Turn the handle on the snake pipe to break up the clog, then slowly pull the pipe out.
5. Put the P-trap back on and run hot water through the pipes to clean them.
6. If the clog is not completely gone, repeat the steps.
7. Use a hair catcher in the shower or bathtub to catch hair before it goes down the drain and causes a clog.

Do It With A Plunger

Plungers are one of the most common tools used around the house to clear clogged drains. There are many different types of plungers on the market, and each one is made for a different kind of drain.

Use a sink or standard plunger to clear drains in bathroom sinks, tubs, and showers. This kind of plunger has a wooden or plastic handle with a rubber cup at the end. Since the cup needs to lay flat over the drain, it works best on flat surfaces like a sink or tub.

Here are the steps to unclog a drain with a plunger:

1. Start by putting enough water in the sink or tub to cover the plunger's suction cup.
2. Put the plunger over the drain and push it down hard to seal it.
3. Push the plunger down and quickly pull it back up. Do this a few times.
4. After a few minutes, take out the plunger and see if the water is draining well.
5. If the water still doesn't flow, go along the steps again.
6. If the clog is still there, you might have to try another method, like using a snake pipe or auger or calling a plumber for help.

It's important to know that a plunger can clear clogs caused by hair, soap scum, and other debris, but it might not work for all types of clogs.

Ways To Prevent Hair From Clogging Drains In The Future

Here are a few things you can do to keep hair from getting stuck in drains in the future:

1. Use a hair catcher. A hair catcher is a simple device that can be put in the shower or bathtub to catch hair before it goes down the drain. This can cut down on the amount of hair that gets into the pipes by a lot.
2. Brush your hair before you take a shower. Brushing your hair before you take a shower can help you get rid of loose hair, which can cut down on the amount of hair that gets into the pipes.
3. Clean drains often: If you clean your drains often, you can get rid of hair and other things that might be building up in the pipes.
4. Don't use harsh chemicals. Harsh chemicals can hurt the pipes and cause them to rust. To clear a clog, it's best to use natural home remedies like baking soda and vinegar or boiling water.
5. Think about what you flush down the toilet: Don't put grease, oil, or food scraps down the drain because they can clog it.
6. Install a mesh screen or hair stopper in the shower or bathtub to keep hair from going down the drain.
7. Use a drain cover or strainer in the sink to stop hair and other things from going down the drain.

By taking these simple steps, you can make it less likely that hair will get stuck in your drains and keep them running smoothly.

via David Murrows Home and Garden davidmurrowathome.blogspot.com